how to make car phone holder sticky again

How to Make Your Car Phone Holder Sticky Again?

Having a reliable and secure phone holder in your car is essential for safe and convenient navigation and hands-free communication. However, over time, the adhesive on your car phone holder may start to lose its stickiness, making it difficult to keep your phone in place. In this article, we will guide you through effective methods to make your car phone holder sticky again. By following these steps, you can ensure that your phone stays securely mounted while you drive.

Understanding the Common Causes of Loss of Stickiness

Before delving into the solutions, let’s first understand why your car phone holder may lose its stickiness. Over time, dust, dirt, and oil can accumulate on the mounting surface, preventing the adhesive from properly gripping. Additionally, exposure to heat and sunlight can degrade the adhesive, leading to reduced stickiness. By addressing these underlying causes, you can restore the stickiness of your car phone holder.

Cleaning the Phone Holder and Mounting Surface

One of the simplest and most effective solutions is to clean both the phone holder and the mounting surface. Here’s how to do it:

  1. Start by removing your phone from the holder and detach the holder from its current position.
  2. Use a damp cloth or sponge to wipe down both the phone holder and the mounting surface.
  3. If there are stubborn stains or residue, you can use a mild cleaner such as dish soap or diluted vinegar.
  4. Rinse the holder and mounting surface thoroughly and dry them completely before reattaching the holder.

Applying Adhesive Alternatives

If cleaning alone doesn’t restore the stickiness, you can try using adhesive alternatives. Here are two methods you can explore:

Method 1: Using Clear Nail Polish or Hairspray

  1. Clean the phone holder and mounting surface as mentioned earlier.
  2. Apply a thin, even layer of clear nail polish or hairspray to the adhesive area of the phone holder.
  3. Allow the nail polish or hairspray to dry completely before reattaching the holder.
  4. Test the stickiness by placing your phone on the holder and checking if it holds securely.

Method 2: Trying a Sticky Adhesive Replacement

In cases where the adhesive has completely worn off, you may consider using a sticky adhesive replacement. Follow these steps:

  1. Purchase a suitable sticky adhesive replacement specifically designed for car phone holders.
  2. Clean the mounting surface and remove any remaining adhesive from the holder.
  3. Warm water and soap can be used to clean the mounting surface and suction cup. Use a mild cleaner for delicate surfaces.
  4. If the surface is made of materials like fiberglass, isopropyl alcohol can be used for effective cleaning.
  5. Attach the sticky adhesive replacement to the phone holder, following the manufacturer’s instructions.
  6. Use a secondary locking mechanism, such as a velcro strap or a metal clip, for additional support.

Enhancing the Suction Power

If your car phone holder utilizes a suction cup mechanism, enhancing the suction power can significantly improve its stickiness. Here’s what you can do:

  1. Clean the mounting surface and suction cup thoroughly using warm water and mild soap.
  2. Use a lint-free cloth soaked in rubbing alcohol to remove any residue or oils from the surface.
  3. After cleaning and preparing the surface, attach the suction cup firmly and press out any air pockets.
  4. To enhance the seal, apply a small amount of oil or petroleum jelly to the inner lips of the suction cup.
  5. Secure the suction cup by twisting or locking mechanisms provided by the holder, ensuring a strong grip.

Considering Alternative Mounting Options

If your car phone holder continues to lack stickiness despite trying various methods, it may be time to explore alternative mounting options. Here are a few alternatives you can consider:

  1. Gooseneck Mount: Suitable for phones or small tablets, gooseneck mounts offer flexibility and a secure grip.
  2. Dashboard Pad (Friction-Grip/No-Skid): These pads rely on friction to hold your device in place and work well for flat dashboards.
  3. CD Slot Mount: Placing the phone or tablet in the CD slot provides a convenient location with easy access to the charging port.
  4. Air Vent Clip: These mounts attach to your car’s air vent and offer easy device removal, but they may obstruct airflow.


Having a sticky car phone holder is crucial for ensuring the safe and secure placement of your phone while driving. By following the methods outlined in this article, you can restore the stickiness of your car phone holder. Start with a thorough cleaning, consider adhesive alternatives, enhance the suction power, and explore alternative mounting options if necessary. Remember, maintaining a clean and dust-free environment is key to ensuring optimal stickiness. Drive safely with your phone securely mounted and easily accessible!

Frequently Asked Questions (FAQs)

Yes, modern phones are designed to be safe for use with magnetic mounts. The magnetic sequencing used in older phones is no longer present, so there is no risk of damaging your phone or deleting data.

There are several methods for attaching a magnet to your phone. You can use adhesive tape, a metal plate or case, or a metal ring that wraps around the phone. Each method has its advantages and limitations.

Magnetic holders are generally safe for phones. However, it’s important to choose a holder with an appropriate magnet strength. Very strong magnets may cause damage or interfere with the phone’s GPS or other signals.

To remove sticky residue from your phone mount, you can use adhesive removers like Goo Gone or WD-40. These products are safe to use on plastic, metal, or painted surfaces. However, avoid using them on electronic devices with glass screens.

Some reliable smartphone mount brands for cars include Scosche, iOttie, Exogear, Ram Mounts, and ProClip USA. These brands offer a wide range of mounts with various mounting options to suit different needs.

Similar Posts


Leave a Reply

Your email address will not be published. Required fields are marked *